Maxview MXL002/TWIN Manual de instrucciones descargar pdf (Pagina 16)

Installing Control Box

Having previously chosen a suitable location

1. Clip the mounting brackets onto the Control Box.

2. Place Control Box on the horizontal or vertical surface and mark the 4 holes.

3. Depending on material drill a pilot hole or use a bradawl.

4. Attach cables to Control Box refer to page 9 for details.

5. Screw control box into position using 4 x No. 6 Screws.

Mounting Positions

Position the Control Box in one of the 4 ways shown below. Make sure that the front is easily

accessible.

Fitting the Control Box Brackets

The brackets snap fit to the Control Box casing

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 33 34

Sin comentarios

Maxview MXL002/TWIN Manual de instrucciones Pagina 16